📷 Image Manager Help Guide

Image Manager organizes the repair-order photos your shop captures. Out in the shop, phones photograph each repair order and the images upload automatically to secure cloud storage. In the office, the desktop program lets you view, organize, print, share, and send those images to your estimating system.

Table of Contents

↑ Back to Top

Logging In

Image Manager identifies you by your cell phone number rather than a username and password.

  1. Enter your cell phone number and click Look Up.
  2. When your number is recognized, the program greets you by name and asks how you'd like to receive a verification code — choose 📧 Email or 📱 Text.
  3. Enter the 4-digit code that arrives and click Verify Code. (Didn't get it? Use Resend.)
  4. You're signed in to your default shop.

Your login is remembered on that device, so on return visits you go straight to the program — and the phone camera goes straight to capturing for your shop — without verifying again.

💡 First time for a shop? User enters personal information in the form and submits it to support. After verifying, user can continue to finish setup entering all shop information.
💡 First time this program for existing shop? After submitting user information, support will send a code to be entered to finish setup.
💡 First time on a device? After verifying, you may be asked for a Shop ID to finish setup.

Getting Started

Image Manager has two faces that work together:

The typical flow:
  1. Log in with your cell phone number and verify with the texted or emailed code.
  2. Confirm your shop (switch shops if you have more than one).
  3. Pick a writer from the list. This will open up the selected writer's HomePage. Double-click any Home image to see its photos.
  4. Double-click an image to view full size image.
  5. Select images and Send to Est, Print, Share, or Merge to PDF.
↑ Back to Top

Working with Shops

Your current shop appears by name in the upper-left of the title bar. Each shop keeps its own separate settings, writers, and images.

Multiple Shops

Image Manager supports the use of multiple shops. This is perfect for companies with multiple locations to be able to view all RO's images.

Switching Shops

Setting a Default Shop

In the shop list, each shop has a Set as Default button. Your default shop is the one that loads automatically when you log in; it's marked (default) in the list.

Removing a Shop

Use the Remove button beside a shop to take it off your list. If you remove your default shop, another shop is automatically promoted to default.

Adding a Shop

  1. Contact support to add a shop to your list
  2. Click the Change link (or the + icon) and choose Add Shop.
  3. Enter the shop-setup password and click Continue.
  4. Choose the Company, then the Shop you want to add.
  5. The new shop is added to your list with a copy of your current shop's preferences.
📷 Image size: by default, the image size saved for new images is 1024 pixels maximum for standard images. This ia a good quality image that zooms in quite well. 📷 Image size: by default, the image size saved for High res. images is 3072 pixels maximum. You can opt to save High res. images that are clearer and sharper but can really only be noticed when zooming in on an image. The larger the image, the better the quality but the slower the operations. It is best to try and find the best balance for your needs.
💡 Note: A newly added shop starts without your name as someone you capture photos for. If you also take pictures for that shop, an administrator can turn on Has Images for you in Settings → Users.
↑ Back to Top

Troubleshooting: No Shop Listed

Problem: No shop name appears, or you see a message that no shops are available for your account.

Possible Causes & Solutions

CauseSolution
Your account isn't assigned to any shopContact your administrator to add a shop to your account.
You're a new user who hasn't finished registeringComplete registration from a desktop (see New User Registration).
Login wasn't recognizedLog out and log back in with your cell phone number.
Network connectivity issueCheck your internet connection and refresh the page.
💡 For Administrators: Open Settings → Users to add a user to a shop, or to add a shop to an existing user.
↑ Back to Top

Main Screen Overview

Title Bar (top)

Control Bar

No writer to pick? If the shop has no writer with images (for example, a shop you just added), the page shows "No writers with images for this shop." This is due to none of the users have been set to have images. Go to settings (gear icon) and view the help section for users.
↑ Back to Top

The RO List

After choosing a writer, the program displays the selected writer's Home images.
Each image here represents all of the images for that RO. Double-click an image to view all of its images; use ← Back to return to the list.

ROs to View Tabs

Once a writer is selected, a row labeled ROs to View: appears with tabs that decide which set of the writer's repair orders you're looking at. The heading above the list always tells you where you are (for example, "[Writer]'s Home Page").

TabWhat it shows
HomeThe default view, and the one you land on when you pick a writer. It's the writer's main working list of active repair orders — the everyday list you'll use most. The heading reads "[Writer]'s Home Page."
New Only the repair orders that have new (not-yet-viewed) images — a quick way to see what's come in from the phones since you last looked.
Keep in mind that the images are tagged as New for the listed writer. Any user can mark them as viewed but it should only be done by the selected writer.
DeletedRepair orders that have been deleted. You can select one and Restore it from here.
Prospects This is simply just another HomePage where you set ROs aside as prospects to kept separate from the Home list. The idea here is to keep your HomePage as a mirror of what is currently in your shop. In the event that the vehicle has not been dropped off yet, this is where those images should go.
🔍 FindOpens the search panel to look up a repair order by number, customer, or claim (see Finding a Repair Order).
💡 Home vs. Prospects: To move a repair order between the two lists, right-click it (or open its menu) and choose Move to Prospects from the Home view, or Move to Home from the Prospects view.
💡 The 'New' button has a count which indicates how many images are waiting for you — no count indicates there are no new images yet to be viewed.

Archiving & Deleting Repair Orders

Select one or more repair orders to enable these buttons in the same row:

↑ Back to Top

Viewing & Organizing Images

Inside a repair order you see thumbnails of every photo.

Image Filter Tabs

Above the thumbnails, these tabs narrow which photos in the RO you see:

Thumbnail Size

The number of images per row is set in Settings → Preferences (Images Row). Each shop remembers its own setting.

💡 Tip: Use ☑ Select All to grab every image at once, then apply an action such as Send to Est or Print.
↑ Back to Top

Image Actions

With one or more images selected, the action buttons become available:

ButtonWhat it does
📤 Send to EstWrites the selected images to your estimating folder (see Send to Estimating).
🖨 PrintOpens a print-friendly view of the selected images.
✔ ViewedMarks the selected images as viewed, clearing their "new" status.
↑ UploadedMarks the selected images as already uploaded to estimating, without re-sending them.
↔ MoveMoves the selected images to a different repair order.
🗑 DeleteDeletes the selected images. Switch to the Deleted filter to Restore them.

Two more actions sit in the bar above the RO and don't need an open image: 📄 Merge PDF combines images into one PDF, and the Share option creates web links (see below).

↑ Back to Top

Send to Estimating

Send to Estimating delivers the selected photos to a folder on your computer that your estimating system reads from. The program clears that folder, then writes the selected images into it.
The images are automatically reduced in this process to allow for the requirements of the estimating system

One-time setup:
  1. Open Settings → Export Images.
  2. Click Add Custom Folder and choose (or create) a dedicated folder — for example Desktop\IMExport.
  3. When your browser asks for permission, choose "Allow on every visit" so you aren't prompted each session.
  4. In your estimating system, browse to that same folder when attaching images.
Daily use:
  1. Select the images you want.
  2. Click 📤 Send to Est.
  3. Optionally turn on Add date stamp to images and/or Mark as uploaded.
  4. Click 📤 Download Image Files. The folder is cleared and the selected images are written into it, ready to attach.
Important: Send to Est clears the chosen folder before writing, so always point it at a folder dedicated to this purpose. The folder feature requires Chrome or Edge.
Images not appearing after a fresh browser session? Open Settings → Export Images and click Re-authorize Folders to restore permission — browsers sometimes drop folder access when fully closed.
↑ Back to Top

Sharing & Printing

Share Image Links

Select images and open the Share option. The program creates a web link for each image; use Copy Link next to any one, or 📋 Copy All Links to grab them together, then paste into an email or text.

💡 Note: Share links stay active for up to 7 days, but anyone with a link can download that image for keeping.

Print

Select images and click 🖨 Print for a print-ready layout.

Merge PDF

Click 📄 Merge PDF to combine the selected images into a single PDF — handy for attaching a full set of photos in one file. You can add more files to the merge list before saving.

↑ Back to Top

Documents

A repair order can hold documents (such as PDFs) alongside its photos.

#endregion
↑ Back to Top

Finding a Repair Order

Click the 🔍 Find tab to open search. You can look across:

Enter your text, click Search, and the results show the matching repair orders.

↑ Back to Top

QR Codes & Mobile Capture

Every repair order can produce a QR code that opens the phone camera directly to that exact repair order — no searching required.

  1. Open the QR Code option for a repair order.
  2. Print Label (to a DYMO label printer), or scan the on-screen code with a phone.
  3. The phone opens straight to that repair order, ready to photograph.
💡 Tip: Printing a QR label and sticking it on the paper repair order makes it effortless for shop staff to photograph the right RO every time.
↑ Back to Top

The Phone Camera Screen

The camera screen is what users use on a phone to take images for repair orders.

💡 Note: The camera always works against your selected shop. After you log in it stays on that shop until you switch — or until a QR code sends you to a specific repair order.
↑ Back to Top

Settings

Open Settings with the ⚙︎ gear in the upper right. The tabs you see depend on your permissions.

Preferences

Your personal display options for the current shop — thumbnail size (Images Row), sort orders, default writer, and image order. Each user remembers its own preferences.

Export Images

Set up the folder used by Send to Estimating. Add a folder, re-authorize folders, and print setup instructions for staff.

Shop Settings

Shop-wide options such as office staff, technicians, and image-size limits. Shown to users with permission to edit shop settings.

Users

Add and manage users for the shop, set their permissions, and control who captures images. Shown to users with permission to manage users.

Label Printer

Configure a DYMO label printer for printing QR labels.

↑ Back to Top

Managing Users

Administrators manage users from Settings → Users. Users are managed per shop.

💡 Note: Permissions are set per shop, so the same person can have different abilities at different shops.
↑ Back to Top

Label Printer

For shops that print QR labels, Image Manager supports DYMO label printers.
The options are Dymo 550 and the Dymo 550 Turbo. both printers are identical but the Turbo can be used as a network printer as well. Print from any computer on the network.
The 550 is connected directly to a workstation and can only be printed from there.

  1. Open Settings → Label Printer.
  2. Select, download and run the Dymo program to control all aspects of the Dymo printer.

Once set up, the 🖨 Print Label button in the QR window sends the code straight to your label printer.

💡 Below the printer setup are some links to web pages that sell the printers and labels.
↑ Back to Top

Troubleshooting

SymptomWhat to try
No writers / blank page after picking a shopThat shop has no photos yet. Capture images from a phone, or confirm the writer has Has Images turned on for the shop.
Send to Est does nothing or asks to choose a folderConfigure an export folder in Settings → Export Images, then try again.
Send to Est worked before but now failsClick Re-authorize Folders in Settings → Export Images. Folder permission can reset after the browser is closed.
Folder access message about Chrome or EdgeThe folder feature requires Chrome or Edge. Open Image Manager in one of those browsers.
An image won't open or downloadRefresh the page. If it persists, the photo may not have finished uploading — recapture it from the phone.
Phone uploads fail silently (Mac or OneDrive)If photos live only in iCloud ("Optimize Mac Storage") or as OneDrive online-only files, the device may not have the actual file on hand. Make sure the photo is downloaded to the device, then re-capture or re-select it.
Phone shows it has no shopThe user needs a default shop. An administrator can set one in Settings → Users.
Verification code didn't arriveUse Resend, and confirm the email and cell phone on your account are correct. Try the other method (text vs. email).
💡 Still stuck? Refresh the page first — it resolves most temporary issues. If a problem continues, note what you were doing and contact support.
📞 Contact support: (310) 397-9000 for any assistance.